Complexes of resorcin[4]arene with secondary amines: synthesis, solvent influence on “in-out” structure, and theoretical calculations of non-covalent interactions

• Waldemar Iwanek

Beilstein J. Org. Chem. 2023, 19, 1525–1536, doi:10.3762/bjoc.19.109

• , finally, the structure with the lowest energy, with the functional PBE0-D4/mTZVPP/CPCM. The Hartree–Fock plus London dispersion (HFLD) method was used for the study of non-covalent interactions (NCI). The calculations lead to the conclusion that a reduction in electrostatic interactions and an increase in

Comparison of crystal structure and DFT calculations of triferrocenyl trithiophosphite’s conformance

• Ruslan P. Shekurov,
• Mikhail N. Khrizanforov,
• Ilya A. Bezkishko,
• Tatiana P. Gerasimova,
• Almaz A. Zagidullin,
• Daut R. Islamov and
• Vasili A. Miluykov

Beilstein J. Org. Chem. 2022, 18, 1499–1504, doi:10.3762/bjoc.18.157

• describe the London dispersion interactions as implemented in the Gaussian 16 program. Results and Discussion Previous electrochemical studies for triferrocenyl trithiophosphite revealed in their cyclovoltammograms three reversible one-electron peaks corresponding to stepwise oxidation of the three

N-Sulfinylpyrrolidine-containing ureas and thioureas as bifunctional organocatalysts

• Viera Poláčková,
• Dominika Krištofíková,
• Boglárka Némethová,
• Renata Górová,
• Mária Mečiarová and
• Radovan Šebesta

Beilstein J. Org. Chem. 2021, 17, 2629–2641, doi:10.3762/bjoc.17.176

• -range London dispersion interactions. Geometrical optimizations were performed with the Karlsruhe split-valence def2-SV(P) basis set [41]. Energies were refined using the Minnesota M06-2X functional [42] and valence triple-zeta def2-TZVP basis set [43]. The lowest energy conformers of both catalyst (S,R

Starazo triple switches – synthesis of unsymmetrical 1,3,5-tris(arylazo)benzenes

• Andreas H. Heindl and
• Hermann A. Wegner

Beilstein J. Org. Chem. 2020, 16, 22–31, doi:10.3762/bjoc.16.4

• substitution prolongs the thermal stability up to years [4], while electron-donating groups attached to the different phenyl rings decrease the thermal half-lives below the time scale of seconds. Even subtle interactions, such as London dispersion in alkyl-substituted ABs, can have a significant influence on

Dispersion interactions

• Peter R. Schreiner

Beilstein J. Org. Chem. 2018, 14, 3076–3077, doi:10.3762/bjoc.14.286

• Peter R. Schreiner Institute of Organic Chemistry, Justus-Liebig University, Heinrich-Buff-Ring 17, 35392 Giessen, Germany 10.3762/bjoc.14.286 Keywords: London dispersion; van-der-Waals potential; London dispersion (LD) [1][2][3], the attractive part of the van-der-Waals [4] (vdW) potential

Evaluation of dispersion type metal···π arene interaction in arylbismuth compounds – an experimental and theoretical study

• Ana-Maria Preda,
• Małgorzata Krasowska,
• Lydia Wrobel,
• Philipp Kitschke,
• Phil C. Andrews,
• Jonathan G. MacLellan,
• Lutz Mertens,
• Marcus Korb,
• Tobias Rüffer,
• Heinrich Lang,
• Alexander A. Auer and
• Michael Mehring

Beilstein J. Org. Chem. 2018, 14, 2125–2145, doi:10.3762/bjoc.14.187

• the analysis of single crystal X-ray diffraction data and computational studies. First, the crystal structures of polymorphs of Ph3Bi (1) are described emphasizing on the description of London dispersion type bismuth···π arene interactions and other van der Waals interactions in the solid state and

• the effect of it on polymorphism. For comparison we have chosen the substituted arylbismuth compounds (C6H4-CH═CH2-4)3Bi (2), (C6H4-OMe-4)3Bi (3), (C6H3-t-Bu2-3,5)3Bi (4) and (C6H3-t-Bu2-3,5)2BiCl (5). The structural analyses revealed that only two of them show London dispersion type bismuth···π arene

• interaction of main group metals has increased significantly, both experimentally and theoretically in the past decade [1][2][3][4][5]. Especially the development of novel computational tools demonstrated the importance of London dispersion type interactions for structures and functions of molecules [6][7][8

The phenyl vinyl ether–methanol complex: a model system for quantum chemistry benchmarking

• Dominic Bernhard,
• Fabian Dietrich,
• Mariyam Fatima,
• Cristóbal Pérez,
• Hannes C. Gottschalk,
• Axel Wuttke,
• Ricardo A. Mata,
• Martin A. Suhm,
• Melanie Schnell and
• Markus Gerhards

Beilstein J. Org. Chem. 2018, 14, 1642–1654, doi:10.3762/bjoc.14.140

• sophisticated local coupled cluster method. The latter also yields a quantification as well as a visualization of London dispersion, which prove to be valuable tools for understanding the role of dispersion on the docking preferences. Beyond the structural analysis of the electronic ground state (S0), the

• File 372: Additional computational and experimental data. Acknowledgements The authors thank the Deutsche Forschungsgemeinschaft (DFG, Ge 961/9-1, Schn 1280/4-1, Su 121/5-1, and Ma 5063/3-1) for financial support in context of the priority program SPP 1807 on the Control of London dispersion

• -corrected density functional theory (DFT-D3) [44][45], spin-component-scaled approximated coupled cluster-singles-doubles (SCS-CC2) [46] as well as explicitly correlated local coupled cluster theory (LCCSD(T0)-F12) [47] calculations, the latter allowing for a quantification and visualization of London

Cobalt-catalyzed C–H cyanations: Insights into the reaction mechanism and the role of London dispersion

• Eric Detmar,
• Valentin Müller,
• Daniel Zell,
• Lutz Ackermann and
• Martin Breugst

Beilstein J. Org. Chem. 2018, 14, 1537–1545, doi:10.3762/bjoc.14.130

• -phenylpyridine furthermore highlight that London dispersion is an important factor that enables this challenging C–H transformation. Nonbonding interactions between the Cp* ligand and aromatic and C–H-rich fragments of other ligands at the cobalt center significantly contribute to a stabilization of cobalt

• intermediates and transition states. Keywords: catalysis; C–H activation; density functional theory; London dispersion; reaction mechanisms; Introduction For a long time, large and bulky substituents have intuitively been considered to act through unfavorable steric interactions, although London dispersion

• ][10][11], London dispersion can also play a crucial role in different transition-metal-catalyzed reactions [12][13][14][15][16][17]. The C–H-rich di-1-adamantylphosphine oxide – a typical dispersion element – was experimentally found to be an excellent preligand for ruthenium- and palladium-catalyzed

Steric “attraction”: not by dispersion alone

• Ganna Gryn’ova and
• Clémence Corminboeuf

Beilstein J. Org. Chem. 2018, 14, 1482–1490, doi:10.3762/bjoc.14.125

• stabilizing contribution from dispersion forces that in many systems turns the ‘steric repulsion’ into a ‘steric attraction’. In addition to London dispersion, such systems benefit from electrostatic stabilization, which arises from a short-range effect of charge penetration and gets bigger with increasing

• recognized in aliphatic systems compared to London dispersion, and are therefore likely to have implications for the development of force fields and methods for crystal structure prediction. Keywords: charge penetration; dispersion; hydrocarbon; non-covalent interactions; steric attraction; Introduction In

• the recent years, perception of the vaguely defined ‘steric’ interactions as categorically repulsive has shifted towards recognizing the crucial role of attractive dispersion in the bulky systems [1]. London dispersion was shown to be capable of bending σ-bonded acene dimers (2 in Figure 1A) [2] and

London dispersion as important factor for the stabilization of (Z)-azobenzenes in the presence of hydrogen bonding

• Andreas H. Heindl,
• Raffael C. Wende and
• Hermann A. Wegner

Beilstein J. Org. Chem. 2018, 14, 1238–1243, doi:10.3762/bjoc.14.106

• important classes of molecular switches is crucial for the design of light-responsive materials using this entity. Herein, we present the stabilization of metastable (Z)-azobenzenes by London dispersion interactions, even in the presence of comparably stronger hydrogen bonds in various solvents. The Z→E

• isomerization rates of several N-substituted 4,4′-bis(4-aminobenzyl)azobenzenes were measured. An intramolecular stabilization was observed and explained by the interplay of intramolecular amide and carbamate hydrogen bonds as well as London dispersion interactions. Whereas in toluene, 1,4-dioxane and tert

• -butyl methyl ether the hydrogen bonds dominate, the variation in stabilization of the different substituted azobenzenes in dimethyl sulfoxide can be rationalized by London dispersion interactions. These findings were supported by conformational analysis and DFT computations and reveal low-energy London

Correlation effects and many-body interactions in water clusters

• Andreas Heßelmann

Beilstein J. Org. Chem. 2018, 14, 979–991, doi:10.3762/bjoc.14.83

• Forschungsgemeinschaft) priority Program No. SPP1807 “Control of London dispersion interactions in molecular chemistry” is gratefully acknowledged.

Local energy decomposition analysis of hydrogen-bonded dimers within a domain-based pair natural orbital coupled cluster study

• Ahmet Altun,
• Frank Neese and
• Giovanni Bistoni

Beilstein J. Org. Chem. 2018, 14, 919–929, doi:10.3762/bjoc.14.79

• , and London dispersion terms. Herein, this technique is employed in the study of hydrogen-bonding interactions in a series of conformers of water and hydrogen fluoride dimers. Initially, DLPNO-CCSD(T) dissociation energies for the most stable conformers are computed and compared with available

• dominate the interaction energies in the long range. London dispersion contributions decay as expected, as r−6. They significantly affect the depths of the potential wells. The interfragment exchange provides a further stabilizing contribution that decays exponentially with the intermolecular distance

• . This information is used to rationalize the trend of stability of various conformers of the water and hydrogen fluoride dimers. Keywords: DLPNO-CCSD(T); hydrogen-bond interaction; interaction energy; local energy decomposition; London dispersion; Introduction Hydrogen bonds are of fundamental

Novel biphenyl-substituted 1,2,4-oxadiazole ferroelectric liquid crystals: synthesis and characterization

• Mahabaleshwara Subrao,
• Dakshina Murthy Potukuchi,
• Girish Sharada Ramachandra,
• Poornima Bhagavath,
• Sangeetha G. Bhat and
• Srinivasulu Maddasani

Beilstein J. Org. Chem. 2015, 11, 233–241, doi:10.3762/bjoc.11.26

• ., 13a with phenyl end group. The large mesomorphic thermal range in the 13b (C12.Ox.C*Cn) series are due to the higher number of methylene units in the alkyl end chain, which results in the higher surface area and higher London dispersion forces between the molecules. Interestingly, a tilted chiral SmC

Substitution effect and effect of axle’s flexibility at (pseudo-)rotaxanes

• Friedrich Malberg,
• Jan Gerit Brandenburg,
• Werner Reckien,
• Oldamur Hollóczki,
• Stefan Grimme and
• Barbara Kirchner

Beilstein J. Org. Chem. 2014, 10, 1299–1307, doi:10.3762/bjoc.10.131

• theory (MP2) calculations [29]. The contribution of the London dispersion interaction to the total interaction energy in the gas phase is of the same magnitude as the hydrogen bonding interaction (about −14 kcal/mol). The molecular functionality of rotaxanes is solely based on the interplay of different

• missing non-local correlation interactions through the atom-pairwise London dispersion correction D3 in the Becke–Johnson damping scheme [35][36]. A single (isolated) dimer was optimized with the same technical setup in a large unit cell with minimum intermolecular atom-atom distance of 16 Å. This method

Computational study of the rate constants and free energies of intramolecular radical addition to substituted anilines

• Andreas Gansäuer,
• Meriam Seddiqzai,
• Tobias Dahmen,
• Rebecca Sure and
• Stefan Grimme

Beilstein J. Org. Chem. 2013, 9, 1620–1629, doi:10.3762/bjoc.9.185

• was therefore employed in further calculations. Corrections for intramolecular London dispersion and solvation effects in the quantum chemical treatment are essential to obtain consistent and accurate theoretical data. For the investigated radical addition reaction it turned out that the polarity of

• problems, e.g., self-interaction error (SIE) leading to underestimated reaction barriers and the lack of long-range electron correlation (London dispersion) effects. Regarding the latter problem, one of the most successful and widely used dispersion correction schemes is DFT-D3, in which a damped, atom

• mol−1 is mainly an effect of the D3-correction (plain PW6B95 and B3LYP differ by 2 kcal mol−1). Although the stabilizing influence of intramolecular London dispersion on the transition state due to its ‘closer’ (more dense) structure is partially quenched by solvation, we think that reliable